Filter
Top Products
Administrator’s Guide and Operating Instructions
59
To connect to the system, enter the system IP address in the
location/address field of the i-mode system, follow with “/iwapindex.htm”.
Example:
The welcome page will be shown on the screen, enter the proper login
name and password, click on “OK” to login to the system and enter the
main menu page.
Select the desired camera by clicking on the button on the main menu, a
live image for the corresponding camera will be showing on the screen.
The image will be in Sub-QCIF format, 88x60 for NTSC and 88x72 for
PAL.
Click on to proceed to the next image. Click on
to back to the main menu.
12. Note For “2x/fps” and Some Limitations
New model for 60FPS(NTSC) / 50FPS(PAL) recording rate
The V1.20 (and later version) software can support 60FPS(NTSC) /
50FPS(PAL) recording rate on a high-end EDR1600 model. The new
model has a “2x/fps” label on its front panel. Please contact your
supplier for the new model.
Note 1: For the new model, 30FPS(NTSC)/25FPS(PAL) is allocated to
http://61.218.36.254/iwapindex.htm