Filter
Top Products
Model
1
1793A
Microwave Converter
LO
Amplitude Range
+8
dBm to
+13
dBm
$7
dBm to
+13
dBm
0 dBm to
+5
dBm
1.
GENERAL INFORMATION
Frequency
(GHz)
Conditions
2
to
18
18
to
26.5
18
to
26.5
Without Option
001, 011
or
021
Without Option
001, 011
or
021
With Option
001, 011
or
021
This Operating and Service Manual contains information about initial inspection, operation, performance
tests, adjustments, troubleshooting and repair of the
HP
Model
1
1793A
Microwave Converter.
2,
Specifications
The
HP
1
1793A
Microwave Converter does not have "hard specifications" against which the instrument
can be tested for performance standards or limits. Instead, the Local Oscillator
(LO)
Requirements are
listed in Table
1.
These requirements are the performance standards or limits against which the
instrument can be tested. The supplemental characteristics listed in Table
2
are not warranted
requirements but are typical characteristics included as additional information for the user.
Table
2.
Supplemental Characteristics
RF
Input Connector:
Precision
3.5
mm male
LO
Input Connector:
Precision
3.5
mm male
IF
Output Connector:
Type-N female
Rear Panel Control Connector:
BNC
female
Dimensions:
Height:
88
mm
(3.5
in.)
Width:
425
mm
(16.7
in.)
Depth:
528
mm
(20.8
in.)
HP System
II
Module Size:
Height:
88
mm
(3.5
in.)
Width:
1
Modular Width
Depth:
508
mm
(20
in.)
1