Filter
Top Products
Microwave Converter Model 11793A
Option 907
Front Handle Kit
Option 908 Option 909
Rack Flange
Kit
Rack Flange and Front
Handle Combination
Kit
Figure
2.
Rack
Mounting
Options
Accessories Supplied
The accessories supplied with the Microwave Converter are shown in Figure 1.
a.
b.
C.
d.
e.
The line power cable may be supplied in several plug configurations, depending on the destination of
the original shipment. Refer to the Paragraph 12
"Power Cables"
in this manual.
Fuses with a 0.7SA rating for both
11
5
and 230 Vac (HP part number 21 10-0063) are supplied.
The control cable
(
HP
part number 8 120- 18 38) is a 30 cm
(1
2 in.) flexible cable with male BNC 50
ohm connectors on each end. It connects to the frequency offset mode output of the measuring
instrument.
The
LO
cable (HP part number 11793-60009) is a 36 cm (14.5 in.) flexible cable with
3.5
mm
female end connectors. The
LO
cable includes a 3.5 mm male to Type-N male adapter. The cable
connects to tlie output
of
the
LO
source. Options
001,
01
1, and 021 delete the adapter.
The
IF
cable (HP part number 11793-60006)
is
a 25 cm (10 in.) flexible cable with Type-N male
50
ohm end connectors. The cable connects to the
RF
input of the measuring instrument.
4