Filter
Top Products
Using the TV 27
Swapping the PIP/POP with the main screen image
With the PIP/POP screen displayed, on the remote control press the Swap button to exchange the
image on the main screen with the image on the PIP/POP screen.
NOTE: Swap cannot exchange the pictures when the main picture source is the VGA, DVI, or YPBPR-1.
Using the sleep timer to turn off the TV
Press the Sleep button on the remote control to set the timer at 30 minutes. Press the button again until
you arrive at your desired turn-off time or 000 to cancel the timer.
The timer cannot be canceled after it starts.
Selecting the screen aspect
With this function you can select one of four screen sizes when viewing videos or digital discs.
Press the Aspect button on the remote control, and if necessary press it again to select the desired
screen size.
Image area Ratio Description
4:3 The normal size screen display has a picture the same size as a
video with a 4:3 aspect ratio.
Use this mode for watching standard definition television in its
original format. Do not use this mode for extended periods of time
to avoid image retention of the black bars.
16:9 This image is expanded in the horizontal direction.
Use this mode for viewing wide screen movies from DVD players.
Zoom 1 The image is expanded in the horizontal and the vertical
directions, maintaining the original proportions.
Use this mode to zoom in on the image.
Zoom 2 The image is expanded in the horizontal and the vertical directions
at different ratios.
Use this mode to zoom in on the image.