Filter
Top Products
Using the TV 35
Add or delete a channel
1 Make sure TV is the input signal for the main picture. Refer to “Selecting the input source” on
page 26.
2 Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for
steps to open and use the menus using the front panel buttons (or the remote control buttons).
3 Select and display TV Setup menu.
4 On the TV Setup menu, select CH Mapping, and then press Setting front panel button (Enter on the
remote control). The Channel Mapping menu appears.
5 Highlight and select User CH so it turns red. Adjust the setting so it reads the channel number you
want to add or delete, and then press Setting front panel button (Enter on the remote control).
6 Highlight and select CH Status so it turns red. Adjust the setting so it reads ADD or DEL, and then
press Setting front panel button (Enter on the remote control).
7 Exit the menu.