Connections
English - 21
This allows you to connect your DVD Recorder-VCR to
other external devices and view or record their outputs.
• Method 1: Connecting a VCR, Set-Top Box (STB) or
DVD player to the LINE IN 1 jacks.
• Method 2: Connecting a Camcorder to the LINE IN 2
jacks.
• Method 3: Connecting a Camcorder to the DV IN jack.
Method 1: Connecting a VCR, Set-Top
Box (STB) or DVD player to the LINE IN
1 jacks
Connecting a VCR or external device to AUDIO/VIDEO
LINE IN 1 jacks of the DVD Recorder.
You can record from connected equipment (VCR, STB or
DVD).
■ You can also use the LINE IN 2 jacks on the front
panel of the DVD Recorder.
■ When the S-Video jack and Video jack are both
connected, the S-Video jack will have priority. Line
Selection will be automatically done.
■ Copy protected content cannot be recorded.
Note
OUTPUT
AUDIOAUDIO
L
R
VCR
DVD
STB
AUDIO
VIDEO
R
L
LINE IN 1
R
L
Step 5: Connecting
External Devices
Method 2: Connecting a
Camcorder to the LINE IN 2 jacks
You can also use the LINE IN 2 jacks on the front panel
of the DVD Recorder. You can record from connected
equipment.
When an input source is inserted into LINE IN 2 while
viewing TV, the input will be switched to LINE IN 2
automatically.
■ If both video and S-video jacks are connected, the
jack connected later will be valid. Usually, connect
to either jack.
■ If both video and S-video jacks are connected, you
can choose either using menu “Setup” - “System” –
“Video Input” (see page 36).
Note
To external device