Hitachi DVRF7U DVD VCR Combo User Manual


 
84 - English
Editing
Press the ENTER button at the end point.
The image and time at the end point are displayed the
end point window.
Press the 34 buttons to select Delete, and then press
the ENTER button.
• Message “Do you want to delete? (Deleted part will
not be restored.)” will be displayed.
• If you want to cancel deletion, press the RETURN
button to return to the Disc Navigation screen.
Press the MAIN MENU button again to exit the menu
after the operation is finished. The Disc Navigation
screen will disappear.
The length of the selection to delete should be at
least 5 seconds long.
If the length of the section to delete is less than 5
seconds, you will be prompted with the message
“The range is too short”.
If the end time precedes the start time, you will be
prompted with the message “End point cannot be
marked earlier than start point”.
Note
10
9
8
7
RETURNSELECTMOVE
Edit Title
DVD-RAM(VR)
00:03:50
End
Delete
Return
00:00:00
00:03:50End
JUN/28/2004 01:16AM CH51
JUN/28/2004 01:16 AM
Title No.05
Start
Start
RETURNSELECTMOVE
Edit Title
DVD-RAM(VR)
00:03:50
End
Delete
Return
00:00:00
00:03:50End
Jun/28/2004 01:16AM CH51
Jun/28/2004 01:16 AM
Title No.05
Start
Start
Do you want to delete?
(Deleted part will not be restored.)
Yes No
Scene Navi. allows you to display a list of the scenes
recorded on DVD-RAM disc using a DVD video
camera/recorder.
Scene Navi. also allows you to display the scenes with
markers attached to the program recorded on this DVD
Recorder-VCR (see “Using Markers/Bookmarks” on
page 48).
You can start playback from any selected scene using the
Disc Navigation screen.
Use 8-cm DVD-RAM discs after removing them from
cartridges.
Press the DISC NAVIGATION button in the playback
or stop status.
Use the 34 buttons to select a program, and then
press the ENTER button.
Use the 34 buttons to choose “Scene Navi.”, and
then press the ENTER button.
• If the scene has no marker, “This [Menu] is not
available because this title list has no scene” will
appear.
Use the 21buttons to select the desired scene, and
then press the ENTER button.
• Playback will start from the selected scene.
4
3
2
1
Displaying a List of Scenes
(Scene Navigation)
DVD-RAM
RW
VR