Filter
Top Products
To play a standard VHS videotape, just insert it into the
VCR deck and press the PLAY button. You can turn on the
Auto Play to enable the VCR deck to play automatically
when you insert a videotape that is missing the Record
Safety Tab. See pages 35~36.
Insert VHS Tape
Insert a standard VHS videotape into the VCR deck.
• When a videotape is inserted, power will turn on
automatically.
Play Tape
Press the PLAY button on the remote control or on the
front panel of the unit. The videotape will begin to
play automatically if it is missing the Record Safety
Tab and Auto Play is turned on. See pages 35~36.
Stop Playback
Press the STOP button on the remote control or on the
front panel of the unit.
■ Press the DVD/VCR button on DVD Recorder-
VCR, or press the VCR button on remote control to
choose “VCR”: “VCR” will appear in the display.
Note
3
2
1
The Tracking adjustment removes the white lines that
sometimes appear during playback because of slight
differences in recording decks. The DVD CHANNEL
buttons will automatically align the recorded tracks with
the playback heads to solve this problem. You may also set
tracking manually.
Adjust Tracking Manually
During playback, press the DVD CHANNEL
/
buttons to remove white lines from the picture.
1
Playback
English - 57
Playing the VCR
Tracking