Filter
Top Products
Press the FUNCTIONS button to display the search
screen in the stop or playback mode. When a program is
recorded, the starting point is given an Index mark for easy
location. However, the VHS Index Search System (VISS)
cannot recognize index marks made by old VCRs. If the
VCR has trouble finding a mark, it is probably because the
cassette was recorded on a VCR without VISS. If you want
to index two programs in a row, set your VCR to stop, then
start recording each program.
Go to [0:00:00] stop
Use this feature when you want to search for the
[0:00:00] counter position on a cassette. Press the
CANCEL button at the point on the tape where you
want to set the counter to [0:00:00].
With the VCR in the stop or playback mode, press the
FUNCTIONS button. The VCR will rewind or fast
forward, searching for the [0:00:00] counter position,
and then automatically stop at that position.
1
End search
Use this feature when you want to search for a blank
position to record a program on a cassette. With the
VCR in the stop or playback mode, press the
FUNCTIONS button. The VCR will fast forward,
searching for a blank position, and then automatically
stop at that position. If the VCR reaches the end of the
tape during end search, the tape will be ejected.
Scan and play
Use scan and play when you don’t know exactly
where a program is located on a cassette tape.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press the
ENTER button.
- Reverse Intro Scan
Highlight “Reverse Intro Scan”, then press the
ENTER button.
When the program you want to watch appears, press
the PLAY button.
3
2
Playback
English - 59
Variable Search
System
SELECTMOVE
VCR
Reverse Intro Scan
End Search
Go to Zero
Forward Intro Scan