Filter
Top Products
Setting Up the LitePro
8 LitePro 560/570 User’s Guide
•
If you have a Macintosh desktop computer with a separate
monitor,
attach one of the Mac adapters to the “VGA” end of
the LitePro cable. Then plug the Mac adapter into the monitor
connector on the computer.
If you want to display your presentation on your monitor as
well as on the projection screen, attach the “Monitor” end of
the LitePro cable to the other Mac adapter. Then connect the
Mac adapter to the end of the monitor cable as shown below.
Figure 5. Connecting a Macintosh desktop computer
power switch “Monitor” end of
LitePro cable
monitor cable “VGA” end of
LitePro cable
Mac adapter Mac adapter
CONNECT.FRA Page 8 Tuesday, January 28, 1997 9:53 AM