Filter
Top Products
Using the LitePro
LitePro 560/570 User’s Guide 27
Sync
The LitePro adjusts signal synchronization automatically for most
computers. But if the projected computer image looks fuzzy, streaked
or noisy, try adjusting the sync from this menu.
To adjust the Sync:
1.
Press the
menu
button to display Menu 1.
2.
Use the right or left arrow buttons to highlight “Sync”.
3.
Press the up or down arrow buttons to adjust the Sync.
Up/Down
These functions allow you to change the vertical position of the
projected image.
To re-position the display:
1.
Press the
menu
button to display Menu 1.
2.
Use the right or left arrow buttons to highlight “Up/Down”.
3.
Press the up arrow button to move the image up. Press the down
arrow button to move it down.
Left/Right
These functions allow you to change the horizontal position of the
projected image.
To re-position the display:
1.
Press the
menu
button to display Menu 1.
2.
Use the right or left arrow buttons to highlight “Left/Right”.
3.
Press the up arrow button to move the image to the left. Press the
down arrow button to move it to the right.
USING.FRA Page 27 Tuesday, January 28, 1997 9:55 AM