Filter
Top Products
LitePro 560/570 User’s Guide 39
Maintenance
This section describes how to:
• clean the lens,
• replace the projection lamps,
• replace the batteries in the remote control, and
• replace the fuse.
Do not open the LitePro case!
Opening the case will expose you to electric shock hazard!
Except for the projection lamps, there are no user-serviceable
parts inside! If you are having problems with your LitePro,
refer to “Troubleshooting” on page 47 of this User’s Guide. Call
In Focus Technical Support if necessary. If your LitePro needs
repair, they will refer you to an In Focus Authorized Service
Provider.
Cleaning the Lens
Follow these steps to clean the projection lens.
1.
Apply a non-abrasive glass cleaner to a soft, dry cleaning cloth.
• Be careful not to use excessive amounts of cleaner.
• Abrasive cleaners, solvents or other harsh chemicals may
scratch the lens.
2.
Lightly wipe the cleaning cloth over the lens.
3.
If you will not be using the LitePro immediately, replace the lens
cover.
MAINT.FRA Page 39 Tuesday, January 28, 1997 9:57 AM