Filter
Top Products
Using the LitePro
24 LitePro 560/570 User’s Guide
Using the Menus
The LitePro has three menus: Menu 1, Menu 2, and the Audio Menu.
Menu 1
Menu 1 allows you to adjust the brightness, tint, synchronization
(sync), and display positioning. Each of the these menu settings is
described in “Menu 1 Functions” starting on page 26.
To display Menu 1:
•Press the
menu
button on the remote.
If you see “EEPROM Failed” displayed on Menu 1, one of the
integrated circuits inside the LitePro has failed. The LitePro
will continue to operate normally. The only loss of
functionality is that changes you make in the menus will not
be saved after you turn the LitePro off. All settings will return
to their defaults. Call In Focus Technical Support. Refer to “If
You Need Assistance” on page 3 for the phone number.
Menu 2
Menu 2 contains controls for a variety of functions that you probably
won’t need to change very often. Each of these is described later in
this manual in “Menu 2 Functions” starting on page 28.
To display Menu 2:
1.
Press the
menu
button on the remote to display Menu 1.
2.
Press the left or right arrow buttons until “Menu 2” is high-
lighted.
3.
Press
select/enter
.
Figure 15. Menu 1
USING.FRA Page 24 Tuesday, January 28, 1997 9:55 AM