InFocus 570 Projection Television User Manual


 
Using the LitePro
30 LitePro 560/570 User’s Guide
To enable Auto Standby:
1.
Press the
menu
button to display Menu 1.
2.
Use the right or left arrow buttons to highlight “Menu 2”.
3.
Press
select/enter
to display Menu 2.
4.
Use the right or left arrow buttons to highlight “Auto Standby”.
5.
Press
select/enter
to cycle through the settings.
Reset
The Reset function changes all the menu function settings back to the
factory default states.
The defaults are:
To reset your adjustments:
1.
Press the
menu
button to display Menu 1.
2.
Use the right or left arrow buttons to highlight “Menu 2”.
3.
Press
select/enter
to display Menu 2.
4.
Use the right or left arrow buttons to highlight “Reset”.
5.
Press
select/enter
. The LitePro immediately resets all the function
settings.
Rear Projection off Test Pattern on
Source Prompt on RS-232 on
Auto Standby 30 minutes Reset off
Source Enable all sources enabled Text Mode off
Prog Button clear white Comp(ress) off
Palette 24,389 Sharpness off
Language English Loudness off
•Video Type NTSC •Mute off
USING.FRA Page 30 Tuesday, January 28, 1997 9:55 AM