Filter
Top Products
04578092
Form P7529
Edition 1
January, 2002
OPERATORS MANUAL FOR
MODEL ETA2 AND ETA5 ANALYZERS
This ETA Analyzer is used for calibration or data collection of torque tools, power and
hand operated, using external transducer(s). This Analyzer can also be used for joint
development and as a failure analysis instrument (using external transducers).
Ingersoll-Rand is not responsible for customer modification of units for applications on
which Ingersoll-Rand was not consulted.
This symbol is to alert the user and service personnel to the presence of important operat-
ing instructions that must be read and understood to prevent personal injury, electrical
shock or damage to the equipment.
IMPORTANT SAFETY INFORMATION ENCLOSED -
SAVE THESE INSTRUCTIONS.
READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS PRODUCT.
IT IS YOUR RESPONSIBILITY TO MAKE THIS SAFETY INFORMATION
AVAILABLE TO OTHERS THAT WILL OPERATE THIS PRODUCT.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN
ELECTRIC SHOCK, FIRE AND/OR SERIOUS PERSONAL INJURY.
Refer All Communications to the Nearest Ingersoll-Rand
Office or Distributor.
© Ingersoll-Rand Company 2002
Printed in U.S.A.
7529_eng.fm Page 1 Wednesday, November 12, 2003 8:57 AM