Ingersoll-Rand ETA5 TV Converter Box User Manual


 
28
To Store Data by Master Round
At main menu, press (Store)
Press (Master Round)
If you are using an Ingersoll-Rand TRD, TSD or Crane UTA type transducer and it is already
plugged in, you are now ready to take readings. The job that appears on screen will be the job
that you selected to be first when you set up the master round.
If you are using any other type of transducer or it is not yet plugged in, you will be prompted to
insert transducer and select transducer to be used. Plug in transducer and press
To return to the main menu, press
Note: You can erase the last reading taken by pressing . If you have
selected Horizontal sampling and the ETA5 has already switched to
the next job, it will switch back when you press .
It is not possible to erase any readings other than the last one taken
in Horizontal sampling mode.
If the characteristic has been configured with Subgroup comment size set to a value other
than 0:
Pressing will allow a subgroup comment to be entered.
Pressing gives analysis of last completed subgroup. (Press again to
continue.)
Pressing gives analysis up to current subgroup. (Press again to continue.)
3
3
Enter
MENU MENU
Reset
Reset
Z
# #
. .
7529_eng.fm Page 28 Wednesday, November 12, 2003 8:57 AM