Filter
Top Products
26
To Store Data by Round - ETA5 ONLY
At main menu, press (Store)
Press (Round)
Screen will show “Select Round No”
Select round number using and press
The maximum number of rounds that can be stored is 25.
If you are using an Ingersoll-Rand TRD, TSD or Crane UTA type transducer and it is already
plugged in, you are now ready to take readings. The job that appears on screen will be the job
that you selected to be first when you set up the round.
If you are using any other type of transducer or it is not yet plugged in, you will be prompted to
insert transducer and select transducer to be used. Plug in the transducer and press
When a complete subgroup of readings has been taken for all jobs in the round, screen will
show “Next Round Cycle “. To continue taking readings, press (this message will be
repeated at the end of each complete subgroup Sub1, Sub2, etc.)
When you have finished taking all readings, pressing will result in a message that the
round is complete. Press .
To return to the main menu, press
Note: You can erase the last reading taken by pressing .
If you have selected Horizontal sampling and the ETA5 has
already switched to the next job, it will switch back when you
press .
It is not possible to erase any readings other than the last one
taken in Horizontal sampling mode.
3
2
Enter
Enter
MENU
MENU MENU
Reset
Reset
7529_eng.fm Page 26 Wednesday, November 12, 2003 8:57 AM