Filter
Top Products
29
To Display Recorded Data on ETA2
From main menu, press (Display/Analyze)
Screen will show job name and Specs; press
Screen will now show x-bar, R, and sigma for total readings
From any Subgroup display, press
Screen will show the Date and Time the readings for that subgroup were taken.
Press , screen will show subgroup comment.
Press again to see the individual readings displayed in groups of four readings per screen.
To Display Recorded Data on ETA5
From main menu, press (Display/Analyze)
Press to display the last recorded Characteristic
Select the job that you want to see using and press
Screen will show job name and Specs; press
Screen will now show x-bar, R, and sigma for Sub1; press
Screen will now show same information for Sub2
You can use to go back and forth between subgroups as required
From any Subgroup display, press
Screen will show the Date and Time the readings for that subgroup were taken.
Press , screen will show subgroup comment.
9
9
Enter
Enter
7529_eng.fm Page 29 Wednesday, November 12, 2003 8:57 AM