Filter
Top Products
42
Press to exit
Display now reads “End of setup”
To return to main menu press or press to edit password protection
The remaining options can be password protected in the same manner.
To Clear Password Protection
From main menu:
Press then press (Misc)
Press then press (Password)
Screen will prompt “Password” - - - - enter the existing password (4 characters) and
press
Screen will prompt “Confirm Password” and display the existing password
Press to confirm or press to clear the password protection
Screen will prompt “Enter new Password”
Press to clear the password (keying in 4 characters before pressing
will result in a new password being created)
Screen will say “Confirm password”
Press to confirm and password is cleared
Notes on Password Protection:
Be aware of the implications of password protection. Always keep a note of the chosen
password somewhere safe. As there is no function to enable an existing password to be
removed without it first being entered, it may be advisable for the person who is ultimately
responsible for the ETA to initially set a password and issue it only to personnel who need the
information. This will prevent an unknown password being entered, accidentally or deliberately,
without anyone else’s knowledge. If an unknown password is encountered, please contact
Ingersoll-Rand for advice.
MENU
MENU
6
5
Enter
Enter Reset
Enter Enter
Enter
7529_eng.fm Page 42 Wednesday, November 12, 2003 8:57 AM