Filter
Top Products
40
–––TC/UB/CLOCK(2/2)–––
U-BIT(PAL) –––
DATE REC OFF
CLOCK ADJUST. .
PAGE BACK
–––CLOCK ADJUST–––
DATE 03 / 04/ 03
TIME 00:00:00
PAGE BACK
–––CLOCK ADJUST–––
DATE 03 / 04 /03
TIME 12:00:
PAGE BACK
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET
SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
This function sets up the date and time of the built-in clock. With the built-in chargeable battery, the
date and time data that have been set are maintained even after the main power is turned off. The
set date and time data are displayed on the monitor or the LCD display according to the settings in
the Menu screen. Set DATE REC in the TC/UB/CLOCK (2/2) screen to ON if the date/time display
is to be recorded on the tape as video signals. With DV signal input, date/time data are not re-
corded. (
☞ Page 42 “Setting date/time recording”)
Setting date and time
Ⅵ Press the OPERATE button to turn on the power and
set it to the STOP mode.
1.
Press the MENU button to display the TOP MENU screen.
2.
Displaying the CLOCK ADJUST Menu.
1 Press the 8 or 9 button to bring the cursor to the desired TC/
UB/CLOCK item. Press SET or the : button.
2 Press the 8 or 9 button to bring the cursor to the NEXT PAGE
item in the TC/UB/CLOCK (1/2) Menu screen. Press SET or the
: button.
3 Press the 8 or 9 button to bring the cursor to the CLOCK AD-
JUST item in the TC/UB/CLOCK (2/2) Menu screen. Press SET
or the : button.
3.
Setting the date and time in the CLOCK ADJUST Menu screen.
1 Press the 8 or 9 button to bring the cursor to the date or time
item. Press SET or the : button.
2 Press the : or ; button to select the digit for setting.
The selected digit starts blinking.
3 Press the 8 or 9 to set the value.
4 Repeat step 1 - 3. After completing the required setting, press
the SET button.
MENU button
OPERATE button
SET button
; button
8 button : button
9 button
TC/UB/CLOCK (2/2) Menu screen
Cursor
CLOCK ADJUST Menu screen
Time (Hour, minute)
Date (MM/DD/YY)
The date and time are set up at the CLOCK ADJUST Menu screen.
The CLOCK ADJUST Menu screen is found under the TC/UB/CLOCK (2/2) Menu.
Setting can be performed while checking the information shown on the monitor connected to the
VIDEO MONITOR OUT terminal.
PREPARATION – Setting/Displaying date and time –
DV6000U_28-051_Eng.p65e 06/03/03, 11:39 PM40