Filter
Top Products
62
TC/UB/CLOCK(1/2) Menu screen
CH1/3
NDF
12H 34M 34S10F
EXT
CH2/4
STOP
SP222min
01/02/03
01:23:45 INS
AM
OVER
48k
T
C
L
dB010203040
OVER
W
Y/C
VA
SYNC
r
e
CF
STOP
KCABEGAP
EGAPTXEN
FFOTESFFOCT
FFOETACILPUDCT
NO)LAP(TIBFD
–––)CSTN(FD/FDN
NUR-CEREDOMGCT
TESERPTCELESGCT
LANRETXEECRUOSGCT
––)–2/1(KCOLC/BU/CT–––
VIDEO
LINE
IN
OUT
MONITOR
OUT
DC12V
DV
IN/OUT
IN OUT
OFF
AUDIO
REMOTE2
IN
B-YR-Y
SYNC IN
TIME CODE
IN OUT
Y
COMPONENT
OUT
CH 1/3 CH 2/4
IN
OUT
MONITOR
OUT
REMOTE1
TIMER
REC PLAY
SERIAL
REMOTE
SIGNAL
GND
Y/C
TIME CODE – Recording the time code – (continued)
Record time codes from an external time code generator
Synchronize the internal time code generator with the SMPTE-compliant LTC time code, which is
input from the TC IN terminal. After synchronization (slave lock), the internal time code generator
continues to run even if external time code signals are not input.
Memo
● If the phase of the external
time code generator and
the phase of the video are
not synchronized, the
“EXT” display blinks.
● If a user’s bit is input to the
TIME CODE IN terminal
with its all digits set as
“F”, BR-DV6000 converts
FFFFFFFF to FFFFFFFE
before recording.
:Connection:
Ⅵ Input reference video signals to the external time code
generator and the SYNC IN terminal of BR-DV6000.
Ⅵ Connect the TIME CODE IN terminal of BR-DV6000 with
the LTC time code output terminal of the external time
code generator.
:Setting:
Ⅵ Front switches
• Set the INPUT SELECT switch to any setting except DV.
• Set the COUNTER switch to “TC”.
• Press the DISP button and set the LCD to the enlarged display
mode.
Ⅵ TC/UB/CLOCK(1/2) Menu screen
Set TCG SOURCE to “EXTERNAL”.
:Operation:
1.
Perform setting for the external time code generator.
2.
Set BR-DV6000 to the RECORDING mode.
¥ The EXT display of the LCD lights up and the time code and
user’s bit of the external time code generator are recorded on
the tape.
During recording, if the internal time code generator is slave-
locked once, the time code continues to run even if the input
time code stops.
REF video
signal
Synchronized signal
generator
SYNC IN terminal
Time code generator
TIME CODE IN terminal
LTC time code
EXT display
DV6000U_52-071_Eng.p65e 06/03/03, 11:40 PM62