Filter
Top Products
52
INDEX+1
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BLANK SEARCH
PLAYBACK – Search function –
Index search
This function searches to the position where the index signal is recorded.
:Setting:
Set “;, :” KEY FUNC in the SYSTEM (1/2) Menu screen to IN-
DEX.
:Operation:
Ⅵ To search an index point in the forward direction from
the current tape position:
• Press the SEARCH + button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
Ⅵ To search an index point in the reverse direction from
the current tape position:
• Press the SEARCH – button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
Ⅵ When the SEARCH + or SEARCH – button is pressed,
the unit fast-forwards or rewinds to the specified in-
dexed position and start playing.
This function searches unrecorded parts of the tape.
Index search progressing:
displayed on the screen
(The number denotes the
corresponding index position.)
Monitor screen
Memo
● If the interval between index signals is less than one minute, the
function may not work well.
● The specifications for index signal recording varies with the device
used.
Monitor screen
Ⅵ In the STOP mode, press the BLANK button.
¥ • If the current position is at a recorded part of the tape, BR-
DV6000 fast-forwards until an unrecorded part is reached
and stops there.
• If the current position is an unrecorded part of the tape, BR-
DV6000 will first advance the tape in the forward direction
for confirmation and thereafter rewind and go into the STILL
mode at the last recorded position.
• During a blank search, “BLANK SEARCH” is displayed on
the monitor.
Blank search
BLANK button
SEARCH–
button
SEARCH+
button
DV6000U_52-071_Eng.p65e 06/03/03, 11:40 PM52