Filter
Top Products
58
DISPLAY (1/2) Menu screen
32K CH–1/2 S 00 inmP0
ASSEM
W
ARNING 7001
DRUM MOTOR FA I LURE
REC INH IB I T
0 3/04/03 STANDBY
-
OFF
1 1:20:00 TCR 02:00:00:00
KCABEGAP
EGAPTXEN
R-REWOL.ISOPRETNUOC
NOYALPSID
FFOFFOOTUADCL
0TSARTNOCDCL
0AMORHCDCL
0SSENTHGIRBDCL
–––]2/1[YALPSID–––
DISPLAY (2/2) Menu screen
KCABEGAP
RUOH42.ELYTSEMIT
YY/DD/MM.ELYTSETAD
NO.OFNITIDE
NO.OFNIOIDUA
MT+ETADETAD/EMIT
NONIAMEREPAT
NOEDOMRTV
NOEDOCEMIT
–––]2/2[YALPSID–––
V
6000
N
AL
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
BR-DV6000 can record and play back SMPTE-compliant time code and user’s bit. With the time
code function, accurate positions of the tape contents can be specified to enhance editing preci-
sion and operation efficiency. During recording or playback, the time code and user’s bit are dis-
played on the monitor or the LCD.
Status display (Monitor/ LCD)
TCG : Time code generator data
TCR : Time code reader data
DTCG : Input time code data from the
DV IN/OUT terminal
ETCG : Input time code data from the
TIME CODE IN terminal
UBG : User’s bit generator data
UBR : User’s bit reader data
DUBG : User’s bit input data from the
DV IN/OUT terminal
EUBG : User’s bit input data from the
TIME CODE IN terminal
Framing mode
(for NTSC only)
: (colon) :Non-drop frame
. (dot) :Drop frame
Time code/User’s bit display
During recording : Data of time code generator
During playback : Data recorded on the tape
During DV input : Data selected with TC DUPLICATE
in the TC/UB/CLOCK Menu screen
The display position can be
selected.
Ⅵ To display the time code/ user’s bit, perform the follow-
ing settings.
• Set DISPLAY in the DISPLAY (1/2) Menu screen to ON or AUTO.
¥ The status is displayed on the monitor or the LCD.
• Set TIME CODE in the DISPLAY (2/2) Menu screen to ON.
¥ The time code, user’s bit or CTL counter is displayed at the
counter display section of the status display.
• Select the counter display mode with the [COUNTER] switch on
the front panel.
•To display the time code, select TC.
•To display the user’s bit, select UB.
Checking the data of time code generator
When it is in the STOP mode,
press the REC button and the data
of the time code generator will be
displayed while the button is held
down.
COUNTER switch
TIME CODE – Displaying the time code –
DV6000U_52-071_Eng.p65e 06/03/03, 11:40 PM58