Filter
Top Products
54
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
–––MULTI CUE UP––––––
CUE I 00 : 01:35:11
CUE2 03 : 42:59:21
CUE3 –– : ––:––:––
CUE4 11 : 21:48:07
CUE5 –– : ––:––:––
EXI T
“SET” :ENTRYCUEDATA
“RESET” :CLEAR CUE DATA
“CUE UP” :EXECUTE CUE UP
PLAYBACK – Multi cue-up –
Using the time codes recorded on the tape, up to 5 points on the tape can be registered as cue-up
points at the Multi Cue-up screen. The registered tape positions (cue-up points) can be searched.
Registering cue-up points
1.
Set the COUNTER switch to TC.
2.
Load a tape with time codes recorded.
3.
Press the CUE UP button.
¥ The CUE UP screen appears on the monitor or the LCD.
4.
Perform playback or search. At the position to be registered,
set it to the STILL or STOP mode.
5.
Press the 8 or 9 button to bring the cursor to the cue-up
point. Press the SET button.
¥ Register the time code data of the current position as a cue-up
point.
• If no tape is loaded, “00” is registered.
• Cue-up points can be registered while the tape is being played
back.
6.
To register more cue-up points, repeat steps
4
and
5
. Up to 5
cue-up points can be registered.
Clearing registered cue-up points
Memo
For details on time code
setting and recording:
(☞ Page 59)
Multi Cue-up screen
Cursor
Press the 8 or 9 button to bring the cursor to the cue-up point to
be cleared. Press the RESET button.
¥ After a cue-up point is cleared, “– –” is displayed.
8 button
9 button
RESET button
COUNTER switch
SET button
CUE UP button
Cue-up point
DV6000U_52-071_Eng.p65e 06/03/03, 11:40 PM54