Filter
Top Products
55
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
Changing cue-up points
1 Press the 8 or 9 button to bring the cursor to the cue-up
point to be changed. Press the : button.
¥ The hour digits of the registered time code display blink.
Press the : button to select the digit to be changed.
2 Press the 8 or 9 button again to change the time code.
Press the 8 button to increase the time code data by 1 frame.
Press the 9 button to decrease the time code data by 1 frame.
3 Press the SET button to register the changed time code.
If no time code is to be registered, do not press the SET button.
Instead, press the ; button to make the blinking time code display
disappear.
Exiting the Multi Cue-up screen
Searching cue-up points
Press the 8 or 9 button to bring the cursor to EXIT. Press the SET
button.
¥ The display of the monitor or the LCD returns to the normal screen.
1.
Set the COUNTER switch to TC.
2.
Press the CUE UP button when the normal screen is displayed.
¥ The Multi Cue-up screen appears on the monitor or the LCD.
3.
Press the 8 or 9 button to bring the cursor to the cue-up
point to be searched.
4.
Press the CUE UP button.
¥ The cue-up operation for the selected point is performed.
While searching is being per-
formed, the cue-up point to be
searched flashes on the moni-
tor or the LCD.
Memo
● For cue-up operation, use
tapes with continuous time
codes recorded.
● If the COUNTER switch is
set to CTL or UB while the
Multi Cue-up screen is be-
ing displayed, the COUN-
TER mode does not change.
Memo
If the COUNTER switch is
set to CTL or UB while the
Multi Cue-up screen is be-
ing displayed, the display
returns to the normal
screen.
SET
button
8 button
9 button : button; button
9 button
8 button
CUE UP button
–––MULTI CUE UP––––––
CUE I 00:01:35:11
CUE2 03:42:59:21
CUE3 ––:––:––:––
CUE4 11:21:48:07
CUE5 ––:––:––:––
EXI T
“SET” :ENTRYCUEDATA
“RESET” :CLEAR CUE DATA
“CUE UP” :EXECUTE CUE UP
Multi Cue-up screen
–––MULTI CUE UP––––––
CUE I 00 : 01:35:11
CUE2 03 : 42:59:21
CUE3 –– : ––:––:––
CUE4 11 : 21:48:07
CUE5 –– : ––:––:––
EXI T
“SET” :ENTRY CUE DATA
“RESET” :CLEAR CUE DATA
“CUE UP” :EXECUTE CUE UP
Cue-up point
During Cue-up operation
DV6000U_52-071_Eng.p65e 06/03/03, 11:40 PM55