JVC BR-DV6000 VCR User Manual


 
53
KCABEGAP
EGAPTXEN
FFOEDOMTAEPER
XEDNI.CNUFYEK,
VDA.FEDOMESUAPGNOL
NIM5EMITESUAPGNOL
FFOEMITCERPUKCAB
DN2EDOMVDA.F/LTS
OTUATCELESCNYS
]2/1[METSYS
PLAYBACK – Repeat playback –
Three types of repeat playback are available for BR-DV6000.
The repeat playback function can be set with REPEAT MODE in the SYSTEM (1/2) Menu screen.
SYSTEM (1/2) menu screen
:Setting:
REPEAT MODE in the SYSTEM (1/2) Menu screen
OFF : No repeat playback.
INDEX : Repeat playback between positions where index sig-
nals are recorded.
V. END : Repeat playback from the beginning of the tape to
the position where recording of video signals ends.
TAPE END : Repeat playback from the beginning to the end of
the tape.
:Operation:
1.
Press the REW button to rewind the tape to the beginning.
2.
Press the PLAY button to start playback.
¥ When it reaches the position set at REPEAT MODE, the tape
starts rewinding and plays back again.
To abort the repeat playback function, press the STOP
button.
Repeat operation
INDEX repeat playback
If no index signal is de-
tected during playback, the
tape will run until the end.
If no index signal is de-
tected during rewind, the
tape will rewind until the
beginning.
If the interval between in-
dex signals is less than
one minute, the function
may not work well.
Memo
If the head is dirty, repeat
playback may not work
well.
TAPE END
V. END
INDEX Playback
Rewind
Index signal Index signal
Beginning of tape End of tape
DV6000U_52-071_Eng.p65e 06/03/03, 11:40 PM53