Filter
Top Products
Masterpage:Right-NoTitle0
15
Filename [HM-HDS4EK_04Basic.fm]
Page 15 April 22, 2003 10:12 pm
● If you have connected the recorder to a TV offering T-V Link
via a 21-pin SCART cable (
੬
pg. 12) and the TV is turned on,
the recorder automatically performs “Preset Download”
(
੬
pg. 16) even if you select “Auto” or “AUTO SET” in step
B
.
NOTES:
● In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither
Auto Clock Set nor Auto Guide Program Number Set.
● If there is a power cut, or if you press
1
or
MENU
while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step
A
.
● Auto Clock Set may not function properly depending on the
reception condition.
● If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
Set Up progresses, the “
q
”
mark on the TV screen
moves from left to right.
When the Auto Set Up is
completed, “SCAN
COMPLETED” appears for
about 5 seconds, then the
normal screen appears.
ATTENTION
Once you have performed Auto Set Up, even if the recorder’s
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the recorder’s memory
and the recorder will not perform Auto Set Up again. You
only need to set the clock. (
੬
pg. 84)
If you have moved to a different area, perform each setting as
required.
● Tuner Set (
੬
pg. 86)
● Clock Set (
੬
pg. 84)
If a new station starts broadcasting in your area, perform
tuner setting (
੬
pg. 86).
Beginning End
HM-HDS4EK.book Page 15 Tuesday, April 22, 2003 10:14 PM