Filter
Top Products
Masterpage:Right-Full-NoTitle0
97
Filename [HM-HDS4EK_07Sub.fm]
Page 97 April 22, 2003 10:12 pm
ON-SCREEN MESSAGES
MESSAGE DESCRIPTION
CAN NOT MODIFY LIVE MEMORY TIME, MORE
CAPACITY NEEDED
DELETE UNWANTED PROGRAMME THEN RETRY
There is not enough memory on the hard disk drive for
Live Memory Playback. To increase the free space, dub
some programmes to cassettes or delete the unwanted
programmmes. (
੬
pg. 63, 58)
DO YOU WANT TO DELETE SELECTED PROGRAMME? Appears when you tried to delete the selected programme
from the hard disk drive. Make sure you really want to
delete the programme. (
੬
pg. 58)
DO YOU WANT TO DELETE SELECTED PROGRAMME
INFORMATION?
Appears when you tried to delete the selected programme
information from the hard disk drive. Make sure you
really want to delete the programme information.
(
੬
pg. 58)
DO YOU WANT TO DELETE SELECTED CASSETTE
INFORMATION?
Appears when you tried to delete the selected cassette’s
all information from the hard disk drive. Make sure you
really want to delete the cassette’s information.
(
੬
pg. 58)
INSERT CASSETTE Appears when you tried to modify the information for
VCR Navigation, but the cassette is not loaded. To modify
the information for VCR Navigation, the cassette must be
loaded. (
੬
pg. 56)
CAN NOT MODIFY INDEX It is not possible to modify the index of a programme
while the hard disk drive is in recording. Wait until the
recording finishes or stop recording to modify the index.
(
੬
pg. 56)
NO CASSETTE For VCR Navigation, load a cassette before pressing
NAVIGATION
. (
੬
pg. 37)
“NAVIGATION” IS SET TO “OFF” For VCR Navigation, set “NAVIGATION” to “ON” on the
“VCR SET UP 1” screen, then press
NAVIGATION
.
(
੬
pg. 37, 79)
UNABLE TO SET TIMER PROGRAMME
DUE TO SHORTAGE OF CAPACITY
DELETE UNWANTED PROGRAMME FROM HDD
There is not enough memory on the hard disk drive for
recording. To increase the free space, dub some
programmes to cassettes or delete the unwanted
programmmes. (
੬
pg. 58)
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME
You can programme this recorder to timer-record as many
as 16 programmes. To programme more, you need to
cancel a timer programme already set. (
੬
pg. 50)
PLEASE ADJUST CLOCK BEFORE TIMER
PROGRAMMING
To set the timer programme, the clock must be set in
advance. (
੬
pg. 84)
GUIDE PROGRAM IS NOT SET
SET GUIDE PROGRAM THEN RETRY
To set the timer programme using the VIDEO P
LUS
+
system, the Guide Program number must be set in
advance. (
੬
pg. 83)
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
An invalid P
LUS
C
ODE
number is input. (
੬
pg. 46)
HM-HDS4EK.book Page 97 Tuesday, April 22, 2003 10:14 PM