Filter
Top Products
Masterpage:Right+
EN 33
Filename [M100_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
VIDEO:
Suitable for playing back a video source disc. The outlines on
the played back pictures will be soft.
To clear the on-screen bar
Press ON SCREEN.
Program Playback
You can program up to 30 tracks (Video CD/SVCD or Audio CD) to
play back in the desired order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select APRGMB, then press ENTER.
The program table appears under on-screen bar.
3 Press the number keys to enter the track numbers in the
VIDEO-CD
Program Total Time
PROGRAM
USE [0-9] KEYS TO SELECT TRACK
desired order.
Examples:
A To select track 5, press the number key A5B and ENTER.
B To select track 15, press the number keys A1B and A5B.
C To select track 25, press the number keys A2B and A5B.
If you have specified a wrong selection
Press CANCEL. The last selection is erased.
Or press CLEAR
(o). The whole selection is erased.
4 Press I. Playback starts in the programmed order.
● When all of the programmed tracks have been played back,
Program Playback stops, but the programmed information
remains.
● To add tracks to the end of the program, perform steps 1 to 3.
● During Program Playback, pressing T skips to the next track
of the program. Pressing S returns to the beginning of the
current track.
To clear the on-screen bar and the contents of the program
Press ON SCREEN.
To cancel Program Playback
Press selection keys to select APRGMB, then press ENTER.
NOTE:
Program Playback is not possible depending on the type of disc.
Random Playback
You can play back all the tracks on the disc in random order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select ARNDB, then press ENTER.
VIDEO-CD
RANDOM
Playback starts in random order.
To clear the on-screen bar
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
NOTE:
The same track will not be played back more than once during
Random Playback.
Select The Switching Interval Of The Slide Show
You can control the switching interval of the slide show.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select “ ”, then press ENTER. The
JPEG
5 sec
10 sec
15 sec
20 sec
25 sec
30 sec
10 sec
pop-up window appears under the selected item.
3 Press selection keys to select the desired option, then press
ENTER.
● Each time you press selection keys, the interval changes as
follows:
5 sec Y 10 sec Y 15 sec Y 20 sec Y 25 sec Y 30 sec Y
(Back to the beginning)
To clear the on-screen bar
Press ON SCREEN.
NOTE:
JPEG files are played back as a slide show. It may take more time
to display an image with larger file size.
M100_00.book Page 33 Friday, February 18, 2005 6:23 PM