Filter
Top Products
Filename [M100_10Subsidiary.fm]
Masterpage:Left+
60 EN
SUBSIDIARY SETTINGS
OTHERS
8 AUTO TIMER ^ OFF / ON
This is the setting for engaging timer recording standby mode.
OFF:
Press j to engage timer recording standby mode.
ON:
Timer recording standby mode is automatically engaged when
the unit is turned off.
8 RESUME ^ OFF / ON / DISC RESUME
When this function is set to “ON” or “DISC RESUME”, you can use
the resume function. (A pg. 24)
OFF:
You cannot use the resume function.
ON:
The resume function works on the disc loaded on the unit.
DISC RESUME:
The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected.
NOTE:
“DISC RESUME” setting works on DVD-VIDEO, VCD, SVCD and
finalized DVD-R/DVD-RW (Video mode) discs. For other types of
discs, the function under “ON” setting will be applied even if
“RESUME” is set to “DISC RESUME”.
If you connect the unit and TV with Component Video Connection
(A pg. 12), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction
of higher-quality images.
8 Interlaced scan
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
8 Progressive scan
Progressive scan displays all the horizontal lines of a picture at
one time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
1 Press PROGRESSIVE SCAN for 3 or more seconds.
● Video output indicator (q) lights on the front display panel if
Progressive scan mode has been established. (A pg. 13)
● Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
● Progressive scan video signal is output from the [COMPONENT
VIDEO OUT (Y/P
B
/P
R
)] connectors. It will not be output from the
[VIDEO OUTPUT] and [S-VIDEO OUTPUT] connectors.
● Interlaced scan mode is the setting at your purchase.
● Interlaced scan mode might be suitable depending on video
material.
● Scan mode cannot be set while menu screen is displayed.
Scan Mode Set
ATTENTION:
● Your TV needs to be compatible with Progressive.
● Connect the unit and the TV using a component video cable.
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
PROGRESSIVE SCAN
DVD
A
M100_00.book Page 60 Friday, February 18, 2005 6:23 PM