JVC DR-M100S DVD Player User Manual


 
Masterpage:Right+
EN 55
Filename [M100_09Editing.fm]
EDITING
Page 55 Friday, 18 February 2005 18:22
You can use your unit as the source player or as the recording
deck.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
1 Make connections.
A When using your unit as the source player
^ connect it’s [S-VIDEO/VIDEO/AUDIO OUTPUT] connectors
to the input connectors on another recorder.
B When using your unit as the recording deck
^ connect it’s [L-1/F-1] connectors on the front or rear panel to
the output connectors on another recorder.
When connecting to another recorder with S-Video connector,
set AREAR AUX L-1B or AFRONT AUX F-1B to AS-VIDEOB.
2 Press CH +/– to select the external input.
Select AF-1B when the source player is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
front panel, and select AL-1B when it is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
rear panel.
3 Press REC MODE repeatedly to set the recording mode.
4 Engage play mode on the source player.
5 Engage record mode on the recording deck.
6 Stop recording on the recording deck, then stop playback on
the source player.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB or AOFFB before starting. (A pg. 59)
Edit To Or From Another Recorder
Audio/video
cable
Recorder
Your unit
Another recorder
Player
TV receiver
TV receiver
Another recorder
Player
Your unit
Recorder
S-Video cable
A When using your unit as the source player
Audio/video
cable
S-Video cable
B When using your unit as the recording deck
Audio/video
cable
Audio/video
cable
M100_00.book Page 55 Friday, February 18, 2005 6:23 PM