Filter
Top Products
Masterpage:Right0
EN 37
Filename [M100_07Timer Recording.fm]
TIMER RECORDING
You can program this unit to timer record as many as 8 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
1 Load a recordable disc.
● For details, refer to “Placing A Disc” (A pg. 10).
2 Press VCR Plus+ to
display the AVCR Plus+
PRGMB screen.
3 Press the number keys
to enter the
APLUSCODE NO.B of a
program you wish to
record, then press
ENTER.
● If you have made a
mistake, press CANCEL and input the correct number before
you press ENTER.
● To clear all entered numbers at a time, press CLEAR(o).
● If the number you entered is invalid, APLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV
screen. Input a valid APLUSCODE NO.B.
● If AGUIDE PROGRAM IS NOT SET SELECT CHANNEL YOU
WANT TO RECORDB appears on the TV screen, set Guide
Channel numbers manually.
● When APROGRAM FULL DELETE UNWANTED TIMER
PROGRAMB appears on the TV screen, you need to cancel
some of the reserved programs.
4 The APLUSCODE NO.B you entered and the matching timer
recording information are displayed on the TV screen. Check
the program data.
● To cancel this setting, press RETURN.
5 Press selection keys to
select desired recording
option as required.
6 Press selection keys to
select the desired
setting, then press
ENTER.
● “Daily/Weekly Recording
Function” (A pg. 37)
● “Recording Mode”
(A pg. 34)
● “Modify Title Name” (A pg. 46)
7 Press ENTER to access the Program Confirmation screen.
8 Press ENTER to complete the timer programming.
● To program another timer, repeat steps 2 - 8.
● If APROGRAM OVERLAPPEDB appears on the TV screen, see
“When Programs Overlap Each Other” (A pg. 41).
9 Press TIMERj to engage the unit's timer mode.
● The unit turns off automatically and j appears on the front
display panel.
● To disengage the timer mode, press TIMERj again.
● There may be cases that the “VCR Plus+ Timer Programming”
function prolongs the stop time of the programming.
● When two successive programs are recorded with the “VCR
Plus+ Timer Programming” function, the ending of the first
program or the beginning of the second program may not be
recorded.
● If the copy limited program is received during timer recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
Daily/Weekly Recording Function
You can record programs with one of the following weekly/daily
timer settings.
VCR Plus+ Timer Programming
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Make sure that the unit’s built-in clock is set properly.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed. If not, see “Changing VCR Plus+ Setting” (A pg. 62)
and set the Guide Channel number correctly.
0-9
TIMERj
VCR Plus+
Selection Keys (FGDE)
ENTER
CANCEL
RETURN
CLEAR
(o)
123
456
789
0
SP
1234
VCR Plus+ PRGM
DATE
START
STOP CH
DAILY/WEEKLY
REC MODE
NAME
PLUSCODE NO.
ENTER VCR PLUS+ CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
OK
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the VCR Plus+ program screen in
step 4. When this happens, set the correct Guide Channel
number for that station.
WEEKLY
MON-FRI
MON-SAT
SUN-SAT
Select to record a weekly program.
Select to record a daily program from Monday
through Friday.
Select to record a daily program from Monday
through Saturday.
Select to record a daily program from Sunday
through Saturday.
XP
12345678
VCR Plus+ PRGM
DATE
START
STOP CH
DAILY/WEEKLY
REC MODE
NAME
PLUSCODE NO.
SET TIMER PROGRAMING WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
PROG
EXIT
M100_00.book Page 37 Friday, February 18, 2005 6:23 PM