Filter
Top Products
114
ENGLISH
Symptoms Causes Remedies
General
• “Push Reset” appears
on the display, and the
control panel movement is
freezed.
Something is blocking the
control panel movement.
Remove the obstacle, then
reset the receiver (see page 2)
.
• If this does not work,
check if the installation has
been correctly done.
• Sound cannot be heard
from the speakers.
The volume level is set to the
minimum level.
Adjust it to the optimum
level.
Connections are incorrect. Check the cords and
connections.
• The receiver does not
work at all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Reset the receiver (see page
2).
FM/AM
• SSM automatic presetting
does not work.
Signals are too weak. Store stations manually.
• Static noise while listening
to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
Disc playback
• Disc cannot be
recognised—“No Disc,”
“Loading Error,” or “Eject
Error” flashes.
The DVD/CD player may
have functioned incorrectly.
Eject the disc forcibly (see
page 4).
• “REGION CODE
ERROR!” appears on the
monitor.
Disc with an incorrect
Region Code is inserted.
Insert a disc with a proper
Region Code (see page 6).
• DVD-R/RW or CD-R/RW
cannot be played back.
• Tracks on the DVD-R/RW
or CD-R/RW cannot be
skipped.
Disc is not finalized. • Insert a finalized disc.
•
Finalize the
disc
with the
component which you used
for recording.
• Disc can be neither played
back nor ejected.
The DVD/CD player may
have functioned incorrectly
Eject the disc forcibly (see
page 2).
• Disc sound and picture are
sometimes interrupted.
You are driving on rough
roads.
Stop playback while driving
on rough roads.
Disc is scratched. Change the disc.
Connections are incorrect. Check the cords and
connections.
Receiver troubles
EN103_122_KD-NX901[E]fb.indd 114EN103_122_KD-NX901[E]fb.indd 114 05.3.17 2:11:40 PM05.3.17 2:11:40 PM