Filter
Top Products
87
ENGLISH
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2 Select a PSM item.
Ex.: When you select “Scroll”
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
To be continued...
Indications Selectable settings, [reference page]
Movie
Demo
Display demonstration
Interval: [Initial]; Display demonstration is activated and shown in
one-minute intervals.
All Time: Display demonstration is activated.
Off: Cancels, [14].
• Display demonstration starts if no operation is done for about
one minute.
KeyIn CFM
Key-in confirmation
On: [Initial]; Power-on, power-off, source (or compass) animations
are activated.
Off: Cancels.
Clock
24H/12H
Clock system
12Hours O 24Hours, [14]
[Initial: 24Hours]
Time
Time
Set the local time (in one-hour intervals).
It is not required to set the minute since it is automatically adjusted
by referring to the received GPS signals.
[Initial: 00:00]
EN84_92_KD-NX901[E]SELfb.indd 87EN84_92_KD-NX901[E]SELfb.indd 87 05.3.17 2:09:01 PM05.3.17 2:09:01 PM