JVC KD-NX901 DVD Recorder User Manual


 
7
ENGLISH
IMPORTANT: The manufacturer assumes
no liability whatsoever for any damage
resulting from missed opportunity or
accidental erasure due to malfunctioning of
the unit or due to trouble in the unit, such as
fatal collapse of the hard disk drive itself.
Since the HDD has its lifetime, it is
strongly recommended to make a copy
of your important recordings, and keep it
using other recording devices.
It should be noted that it may be unlawful
to re-record pre-recorded tapes, records, or
discs without the consent of the owner of
copyright in the sound or video recording,
broadcast or cable programme and in any
literary, dramatic, musical, or artistic work
embodied therein.
Before using HDD
While the unit is turned on, the hard disk
is constantly rotating at a high speed. This
requires you to notice the following:
DO NOT impart vibration or shock.
DO NOT allow anything having strong
magnetism or emitting strong electromagnetic
waves (cellular phones, etc.) near the unit.
DO NOT disconnect the power cords from the
car battery when the unit is turned on. Failure
in following the above cautions may damage
the HDD (the stored data will be lost and be
never restored).
Serial Copy Management System (SCMS)
This system uses SCMS which allows only
first-generation digital copies to be made of
premastered software such as regular CDs. If
you try to record from a duplicated CD-R/
RW, SCMS Cannot Copy may appear on
the display then recording will be cancelled.
Display indications
This unit displays a variety of the screens.
More detailed information is described in
each related sections.
Navigation displays:
Route guidance has not been started, but
the unit is in navigation mode:
The display shows the current position.
Compass is always shown even if
“Compass” is set to “Off” (see page 88).
Route guidance has been started:
The display shows the navigation guidance.
While the guidance is performed, you can also
enjoy playing any source (ex. HDD).
Source playback displays:
Compass is shown if “Compass” is set to
“On.”
EN02-10_KD-NX901[E]fb.indd 7EN02-10_KD-NX901[E]fb.indd 7 05.3.17 1:59:30 PM05.3.17 1:59:30 PM