JVC SR-MV40U DVD VCR Combo User Manual


 
Masterpage:Right+
EN 21
Filename [SR-MV40U_05Name.fm]
Page 21 November 25, 2005 11:19 am
INITIAL SETTINGS
Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press we to select “INITIAL SET UP”, then press ENTER.
4 Press we to select “TUNER
SET”, then press ENTER.
5 Press rt to select “AUTO CH
SET”, then press ENTER. You
can automatically set the
receivable channels in your area
in the order of their frequencies.
When Auto Channel Set is
complete, “SCAN COMPLETED”
appears on the TV screen.
If the scan was unsuccessful,
“SCAN COMPLETED–NO SIGNAL–” appears on screen. Check the
connections and start again.
6 Press SET UP to complete the setting.
Manual Channel Set
You can add the channels you want or delete the channels you do
not want manually.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press we to select “INITIAL SET UP”, then press ENTER.
4 Press we to select “TUNER
SET”, then press ENTER.
5 Press rt to select “MANUAL
CH SET”, then press ENTER.
6 Add or skip the desired
channels.
To add channels
A Press rt to select “CH”, then
press ENTER.
B Press rt to select a channel
number you want to add, then press
ENTER.
C Press rt to select “ADD/SKIP”, then press ENTER.
D Press rt to select “ADD”, then press ENTER.
E Repeat BD to add other channels.
To skip channels
A Press rt to select “CH”, then press ENTER.
B Press rt to select a channel number you want to skip, then
press ENTER.
C Press rt to select “ADD/SKIP”, then press ENTER.
D Press rt to select “SKIP”, then press ENTER.
E Repeat BD to skip other channels.
7 Press SET UP to complete the setting.
Tuner Set
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be displayed on
the right side of “BAND” on the Tuner Set screen.
1
4
7
2
5
8
0
3
6
9
ENTER
SET UP
rtw e
VCR/DVD
SR-MV40US.book Page 21 Friday, November 25, 2005 11:19 AM