Filter
Top Products
Masterpage:Right+
EN 45
Filename [SR-MV40U_08VCR Operation.fm]
Page 45 November 25, 2005 11:19 am
OPERATIONS ON VCR DECK
Next Function Memory
The Next Function Memory “tells” the unit what to do after rewinding.
Before continuing, make sure the unit is in the Stop mode.
For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds.
For Automatic Cassette Ejection After Tape Rewind
Press 3, then press x (VCR) on the unit within 2 seconds.
Repeat Playback
Your unit can automatically play back the whole tape repeatedly.
1 Press 4 to start playback.
2 Press and hold 4 for over 5 seconds, then release.
● lights up on the front display panel.
3 Press 8 at any time to stop Repeat Playback.
● Pressing 4, 3, 5 or 9 also stops Repeat Playback.
NOTES:
● To select the returning point (recording end or tape end), see
“RETURN POINT” on page 73.
● It is possible to use the Mode Lock function. (
੬ pg. 77)
Manual Tracking
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually by
pressing the CH buttons.
1 During playback, press CH + or – on the unit simultaneously to
activate manual tracking.
2 Press CH + or – to adjust the tracking manually.
● To return to automatic tracking, press CH + or – simultaneously or
eject and insert the tape again.
NOTE:
When a new tape is inserted, the unit enters the automatic tracking
mode automatically.
Adjusting picture condition — Digital TBC/NR
Your unit is equipped with the Digital TBC (Time Base Corrector)
that removes jitter from fluctuating video signals to deliver a stable
picture even with old tapes and rental cassettes.
The Digital 3-DNR (Noise Reduction) which cuts noise and
enables clear picture reproduction is also linked to this function.
We recommend that you use the DIGITAL TBC/NR function
when...
— playing back a tape recorded on a camcorder.
— playing back a tape repeatedly used.
— using this unit as the source player for editing.
Press TBC on the unit so that the TBC lamp lights up on the unit.
● Each time you press the button, it toggles this function on and off.
NOTES:
● If you play back a tape recorded under poor TV reception condition,
the picture may become more stable with Digital TBC/NR
deactivated.
● If you play back a tape where certain types of signals are recorded
(using a PC or some character generators) with Digital TBC/NR
activated, the playback picture may be distorted. In this case,
deactivate Digital TBC/NR.
● Digital TBC/NR and Video Stabilizer (੬ pg. 72) cannot be used at
the same time; if you activated Digital TBC/NR when “VIDEO
STABILIZER” is set to “ON”, Video Stabilizer will be automatically
turned “OFF”. Make sure Digital TBC/NR is deactivated when you
want to use Video Stabilizer.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L, HI-FI
R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO changes the soundtrack as follows:
NOTES:
● “HI-FI” should normally be selected. In this mode, Hi-Fi stereo tapes
are played back in stereo, and the normal audio track is played back
automatically for tapes with only normal audio.
● “SUPERIMPOSE” must be set to “ON” or “AUTO” or the on-screen
displays will not appear. (੬ pg. 72)
VHS Progressive Scan
You can watch the image on VCR deck in the Progressive scan
mode via component video.
A
TTENTION:
Your TV needs to be compatible with Progressive and to have
Component video input connectors.
A Set the Progressive-compatible TV to the component input
mode.
B Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit, then press PROGRESSIVE SCAN for 3 or more seconds
so that the Video output indicator ( ) lights on the front display
panel.
C Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
D Press VCR]DVD.
NOTES:
● Be sure to engage the DVD deck in stop mode.
● It is not possible to perform the above steps when the DVD deck is in
timer standby mode.
TRACK
USE
On-Screen Display
HI-FI Hi-Fi sound is played back
HI-FI L
Sound on the left Hi-Fi channel is
played back
HI-FI R
Sound on the right Hi-Fi channel is
played back
NORM
Sound on the normal track is played
back
NORM
HI-FI
Both sounds on the Hi-Fi track and
normal track are mixed and played
back
SR-MV40US.book Page 45 Friday, November 25, 2005 11:19 AM