Filter
Top Products
17
INSTALLATION AND CONNECTION
Initially tighten the coaxial cable plugs fi nger-tight, using no tools, then tighten them lightly using
an open-ended SW 11 spanner. Do not try to pull the cables from the unit. This could damage
the cables or loosen the cable connections.
• Apply a little adhesive sealant to the six threaded holes in the mounting plate and screw the
fastening screws into the thread.
Tighten the screws to a torque of 6 Nm.
• Run the connecting cables through the waterproof HDZ 100¹
)
roof gland into the interior of the
vehicle. In so doing the cables may not be crushed, kinked or damaged.
The connecting cables between the turntable and the connecting/control unit may
not be extended!
¹
)
The HDZ 100 roof gland is available as an accessory under part number 20410032 from specialist
dealers.