Filter
Top Products
57
SPECIAL MESSAGES FROM THE TURNTABLE
A serious software error has occurred. Reset the turntable in the CAP menu, or contact our service centre.
MESSAGES ARISING FROM SOFTWARE PROBLEMS
The turntable antenna software is defective. An update is required. Contact our service centre.
The connection to the turntable is defective. Reset the turntable in the CAP menu, check the connections
between the turntable and receiver, or contact our service centre.
The receiver has lost communication with the turntable. Check the connection between the UFS 940sw
and the turntable, the power supply and whether possibly the ignition signal is present at the CAP.
FURTHER MESSAGES
This message may also appear if:
- the ignition is switched on
- voltage is present at the ignition cable
(green)