Filter
Top Products
46
CAP MENU (TURNTABLE ANTENNA SETTINGS)
Using the
buttons or the numeric keys, enter the required tilt angle (skew) for the LNB and press
the
button to confi rm. Check your settings by referring to the “Signal-Strength” and “Signal-Quality”
bars on the right-hand side. The higher the bar, the stronger and better quality the signal received.
LNB TILT/SKEW
Use the
buttons to select whether the CAP should stop automatically (Yes or No) on detection
of a satellite signal during manual alignment by the user.
STOP ON SIGNAL
As soon as you switch the orange bar to the “Move to the azimuth (rotate the antenna)” line you will see
the following display:
MOVE TO THE AZIMUTH (ROTATE THE ANTENNA)
You now have the following options for rotating your CAP:
- “Step by step” using the
buttons
- “Move towards min” (minimum rotary position) with the
button or
- “Move towards max” (maximum rotary position) with the
button
Note: If you previously set “Stop on signal” to “Yes”, the antenna will stop as soon as it detects
a satellite signal.