Filter
Top Products
58
SPECIAL MESSAGES FROM THE TURNTABLE
The satellite you have selected cannot be received from your current location, or there may have been
changes made using the “CAP settings” menu (see section “CAP menu (turntable antenna settings),
CAP settings”), as a result of which the desired satellite cannot be received.
You have used the UFS 940sw to program programmes for recording (see timer list view in the
UFS 940sw EPG). If you now move the CAP to the park position, your recordings will not be performed.
To prevent the turntable rotating at a time when it is unsupervised or when
rotation might be irritating (e.g. in the middle of the night), a timer can be set.
During the timer period the turntable is active only if the UFS 940sw is in operation
or is in standby mode.
If the receiver is completely switched off (switched off at the power socket)
and/or the turntable is in park position, the turntable will be inactive during the
timer period! The same applies if during the fi rst movement the satellite position
is not found.
The timer function is currently not yet available in CAP mode!