Filter
Top Products
Timer Settings
28
You can use the timer to ensure that a programme is recorded at
the correct time with a video or DVD recorder. A total of 14 timers are
provided, which you can set to different programmes or start/end
times.
To access the Timer menu from the main menu, press
,
use the
keys to select “System Parameters”, then
press
, use
to go to “Local Time/Timer” and press
again. The following display appears (example):
Use the
keys to move the cursor to the desired timer and
confi rm with
.
“Press
to exit the timer.”
You can now make the following settings:
- Channel types (TV, radio or On Air Download)
- Channel number (channel name is shown automatically)
- Start time (date and time)
- Stop time (date and time)
- Timer status (no, once, daily, weekly)
You can make the settings using the
keys or the number keys.
Note that incorrect time settings may be rejected and leading zeroes
(e.g. 07:15) must be entered when entering the time.
The current time is shown under “Start time”, which you can then
change. If nothing else is entered, the end time is automatically set to
the same date and one hour after the start time.
At the end, confi rm your settings by pressing
or
three times.
Do not forget the
“Status” setting!