Filter
Top Products
Reset/Park
68
Use the
keys to go to the “Reset/Park” option, and
change the selection to “Reset” using the
keys to go to the “Reset/Park” option, and
keys to go to the “Reset/Park” option, and
keys. Now press
The following screen appears:
The antenna is reset, and automatically moves to the park position. A
short message “Antenna reset” appears again. Press
to exit the
menu.
Note:
Before replacing individual components of the system (e,g, recei-
ver), the turntable
should be moved to park position with
“
Re
“Re“
set
”
.
After the
“
Reset
“Reset“
”
, all satellite positions previously saved
”, all satellite positions previously saved ”
in the
UFD 170 control unit are deleted. However, the
satellite data
in the receiver
component of the UFD 170 is retained.
in the receiver component of the UFD 170 is retained.in the receiver
Press
in the main menu, and then use the
keys to switch to the “HDP antenna setup” option. Then press
to go to the HDP menu.
Reset