Filter
Top Products
Installation Menu
60
The receiver then begins the update process. If your receiver is already
up to date, a message appears on the screen to notify you of this.
Once the update is complete, the receiver is re-initialised and starts
operation again. In case of an error or no signal, the message
“Download failed” appears.
N
ever turn
off the receiver
during the up
date process, as
otherwise you could lose the entire software. It will then need to be
re-installed in a works
hop or using a P
C and n
ull
modem cable.
During the download, “Please wait” fl ashes on the screen.
Follow all on-screen instructions.
After a software update, you must reset the
clock and check
whether the
“
HDP Antenna Setup
”
menu option in the main menu
is set to
“
On
”
. If not, set the selection to
“
On
”
using the cursor
keys, as otherwise you will not be able to operate or actuate the
turntable.
You can also download the updates from the Internet. The address is:
http://w
http://w
ww.kathrein.de
First click on “Service” and then on “Software and Download”. Select
“Receiver”.
The page provides instructions for the procedure.