Filter
Top Products
Managing Channel List/Channels
41
Pressing the
key takes you to the channel list. Press
to display
the following screen:
Adding Channels Manually
You can make the entries for the new channel here.
The fi rst line in the list is highlighted with a coloured bar.
You can use the
keys to move the bar to the desired item.
Make the desired settings or entries using the
keys and the num-
ber keys. You can set:
- The satellite received
- The transponder and the transponder frequency
- The polarisation
- The symbol rate.
The following items:
- “Name”
- “Video PID” (Programme Identifi cation)
- “Audio PID”
- “PCR PID” (Programme Clock Reference)
will only accept alphanumeric or decimal entries.
Pressing the
key takes you back to the channel list. You will see
a message confi rming that your changes have been saved, and the
information display for the currently selected channel will appear on
the screen for a few seconds. The new channel is added to the existing
channel list.
The required PIDs are available in the relevant magazines and on the
Internet. For details of how to make alphanumeric entries, refer to the
“Alphanumeric Assignment of Remote Control Number Keys” section.
Attention: You can only select
satellites that are available in
the installation menu.
Attention:
This function is
only required for chan
nels
that are not broadcast to the
DVB standard. All channels
that comply with the standard
are recognised and saved by
t
he automatic search.
Attention: Never change
the PID information without
good reason, as they affect
idenfi cation of the reception
signal.