Filter
Top Products
Audio Settings
30
Use the
keys on the UFD 170 remote control to set the desired
volume on the receiver. A bar is shown, which indicates the set
volume:
The alignment of the sound wave symbols shows the setting - mono left
(sound waves point to the left), mono right (sound waves point to the
right) or stereo (sound waves point in both directions). The fi rst of the
two fi gures indicates how many sound channels are being transmitted
and the second fi gure indicates which channel is currently selected.
Use the
key to open the Audio menu for sound and language se-
lection, where you can make the desired settings as long as they are
included in the received signal, e.g. language selection (soundtrack),
Dolby Digital.
Setting the Volume
Stereo and Two-Channel Sound Playback
The set sound playback method can be seen from the channel
message, which you can view using the
key (depending on the
alignment of the sound wave symbols).
Select the menu options using the
keys and make the desi-
red settings with the
Select the menu options using the
Select the menu options using the
keys. Press
again to exit the menu. If
subtitles are broadcast, you can select their language using the
again to exit the menu. If
again to exit the menu. If
keys in the “Subtitle track” bar. Confi rm your entry with
.