Filter
Top Products
L19LD800 Series - Back
14
L19LD800 Series - Back
1 2 3 4
1. ALARM I/O & RS-485 TERMINAL – Connection point for external devices:
• The Alarm Block is used to connect devices such as a motion sensor, door/alarm
sensor, or time lapse VCR for Alarm Recording. Refer to appendicies for Alarm Block
Configuration. Alarm devices are not included.
• The RS-485 Block is used to connect devices such as a keyboard or a PTZ
(Pan/Tilt/Zoom) Camera. Keyboards and PTZ Cameras are not included.
2. RS-232 - Connects to devices such as a keyboard and a POS device (not included).
3. ETHERNET (LAN) PORT - Connects the monitor to a router for connection to the internet. Refer to
appendicies for Remote Connection setup.
4. 6-PIN DIN CAMERA INPUTS - Channel 1~4 Camera inputs (for cameras with 6 Pin
DIN connections).
Cameras with 6 Pin DIN connections draw power from the System - additional power
adaptors are not needed.
5. BNC VIDEO INPUTS - Channel 5~8 camera inputs (used to connect Cameras with BNC connection
type). Cameras with BNC connections require an additional power adapter.
6. POWER INPUT - Connect the AC power using the power cord provided with the unit from the
monitor to an electrical outlet
5 6
Rear Ports with Labels: