Filter
Top Products
Network Setup Menu
47
Notification Setup
This menu enables notification of event information to Email or Network when an event occurs.
• EMAIL SENDER – Set the email address
to appear as the Sender when an email is
received.
• RECEIPIENTS – Set the list of email
addresses to receive an email when an
event occurs.
• INTERVAL – Set the notification interval
between emails
• LIMIT- Set the maximum number of emails
to be sent for a particular event.
• NETWORK SITES SET – Set the list of
sites to receive emails when an event
occurs.
Email Notifications:
The E-MAIL section allows the sending of an email
to a designated address when an event occurs.
Configure correct settings of SENDER and
RECIPIENTS. You can register the e-mail address
of recipients up to 5. Press the CHECK button to
test the e-mail setup. The system displays the
status result of connection test for each e-mail
address.
Note: A correct address for both SENDER and
RECIPIENT must be configured. The e-mail
address must include the “@” character to be a
valid address. You can use up to 40 characters
including spaces.
Press the EXIT button to exit the e-mail notification window. Information about the time of event
occurrence is sent along with the title and event content when an event occurs.
For example, if a motion event occurs, an e-mail as below will be sent.
Subject: Event Notification, 2006/11/03 00:00:00
Contents:
2006/08/22 09:32:07 PM Motion 3
===============================================
System ID : 0
System Name : Home
===============================================
Web Viewer: http://192.168.12.188
The “INTERVAL” represents the frequency of the e-mail notification when an event occurs. The “LIMIT”
shows the maximum number of emails sent within each interval.