Filter
Top Products
PTZ Setup Menu
41
SEQUENCE Control
Pressing the SEQ key in the live view mode causes the system to display live channels sequentially.
In full screen mode, the system sequences through the cameras and displays them full screen. In the
multi screen mode, the system displays the 2x2 live screens sequentially.
For example, if the system is in the full screen mode or the 3x3 screen, the onscreen display will appear
in sequence as:
Ff the system is in the 2x2 screen mode (Quad), the onscreen display will appear in sequence as:
Press the SEQ key to exit the sequence mode.
PTZ Setup Menu
Setup controls for a PTZ Camera (Not included).
• CH1~CH8 PTZ – Sets the channel to ON
or OFF for PTZ Camera use.
• PROTOCOL – Set the protocol for use
with the camera. Refer to the specific
camera guide for information.
• ID– Set the ID for use with the camera
between 0~255. Refer to the specific
camera guide for information.