Filter
Top Products
Event Menu
34
Motion Setup
Controls the actions when Pixel-based motion is
detected on a Channel.
• HOLD TIME – Set the length of time that
the event action will occur (i.e. Buzzer,
Onscreen display, etc.)
• CH1~CH8 – Sets the alarm for each
channel to ON or OFF.
• ZONE – Set the Motion Detection Area for
each camera:
o Grid: Select blocks in the grid to
turn the motion detection area ON
or OFF. (Clear = ON, Pink = OFF).
o Set All: Turns on all sections
o Clear All: Turns off all sections
o Inverse: Reverses the current
setup
o Test: Test the motion detection on
that camera. Detected fields are
highlighted.
• ACTION – Set the behavior for the system when an event is
detected on the specified channel:
o All: All actions occur
o Relay: A relay output will occur to the Alarm-Out
function
o Buzzer: An audible buzzer will sound when an event is
detected.
o Email: An email will be sent (based on user and LAN
settings)
o Network: An alert will be sent to the remote client
(based on LAN settings).
• RECORD – Select the cameras to record when an event is
detected. Select ALL Cameras, each camera separately or a
combination of individual cameras.